Generations or historical overview of the computer
A complete history of computing would include a multitude of diverse
devices such as the ancient Chinese abacus, the Jacquard loom (1805) and
Charles Babbage’s “analytical engine” (1834). It would also include discussion
of mechanical, analog and digital computing architectures. As late as the
1960s, mechanical devices, such as the Marchant calculator, still found
widespread application in science and engineering. During the early days of
electronic computing devices, there was much discussion about the relative
merits of analog vs. digital computers. In fact, as late as the 1960s, analog
computers were routinely used to solve systems of finite difference equations
arising in oil reservoir modeling. In the end, digital computing devices proved
to have the power, economics and scalability necessary to deal with large scale
computations. Digital computers now dominate the computing world in all areas
ranging from the hand calculator to the supercomputer and are pervasive
throughout society. Therefore, this brief sketch of the development of
scientific computing is limited to the area of digital, electronic computers.
The evolution of digital computing is often divided into generations.
Each generation is characterized by dramatic improvements over the previous generation
in the technology used to build computers, the internal organization of
computer systems, and programming languages. Although not usually associated
with computer generations, there has been a steady improvement in algorithms,
including algorithms used in computational science. The following history has
been organized using these widely recognized generations as mileposts.
3.1 First Generation Electronic Computers (1937 –
1953)
Three machines have been promoted at various times as the first electronic
computers. These machines used electronic switches, in form of vacuum tubes,
instead of electromechanical relays. In principle the electronic switches were
more reliable, since they would have no moving parts that would wear out, but
technology was still new at that time and the tubes were comparable to relays
in reliability. Electronic components had one major benefit, however: they
could “open” and “close” about 1,000 times faster than mechanical switches.
The earliest attempt to build an electronic computer was by J. V.
Atanasoff, a professor of physics and mathematics at Iowa State, in 1937.
Atanasoff set out to build a machine that would help his graduate students
solve systems of partial differential equations. By 1941, he and graduate
student Clifford Berry had succeeded in building a machine that could solve 29
simultaneous equations with 29 unknowns. However, the machine was not
programmable, and was more of an electronic calculator.
A second early electronic machine was Colossus, designed by Alan Turning
for the British military in 1943. This machine played an important role in
breaking codes used by the German army in World War II. Turning’s main
contribution to the field of computer science was the idea of the Turing
Machine, a mathematical formalism widely used in the study of computable
functions. The existence of Colossus was kept secret until long after the war
ended, and the credit due to Turning and his colleagues for designing one of
the first working electronic computers was slow in coming.
The first general purpose programmable electronic computer was the
Electronic Numerical Integrator and Computer (ENIAC), built by J. Presper
Eckert and John V. Mauchly at the University of Pennysylvania. Work began in
1943, funded by the Army Ordinance Department, which needed a way to compute
ballistics during World War II. The machine wasn’t completed until 1945, but
then it was used extensively for calculations during the design of the hydrogen
bomb. By the time it was decommissioned in 1955 it had been used for research
on the design of wind tunnels, random number generators, and weather
prediction. Eckert, Mauchly, and John Von Neumann, a consultant to the ENIAC
project, began work on a new machine before ENIAC was finished. The main
contribution of EDVAC, their new project, was the notion of a stored program.
There is some controversy over who deserves the credit for this idea, but no
one knows how important the idea was to the future of general purpose
computers.
ENIAC was controlled by a set of external switches and dials; to change
the program required physically altering the settings on these controls. These
controls also limited the speed of the internal electronic operations. Through
the use of a memory that was large enough to hold both instructions and data,
and using the program stored in memory to control the order of arithmetic
operations, EDVAC was able to run orders of magnitude faster than ENIAC. By
storing instructions in the same medium as data, designers could concentrate on
improving the internal structure of the machine without worrying about matching
it to the speed of an external control.
Regardless of who deserves the credit for the stored program idea, the
EDVAC project is significant as an example of the power of interdisciplinary
projects that characterize modern computational science. By recognizing that
functions, in the form of a sequence of instructions for a computer, can be
encoded as numbers, the EDVAC group knew the instructions could be stored in
the computer’s memory a long with numerical data. The notion of using numbers
to represent functions was a key step used by Goedel in his incompleteness
theorem in 1937, work which Von Neumann, as a logician, was quite familiar
with. Von Neumann’s background in logic, combined with Eckert and Mauchly’s
electrical engineering skills, formed a very powerful interdisciplinary team.
Software technology during this period was very primitive. The first
programs were written out in machine code, i.e. programmers directly wrote down
the numbers that corresponded to the instructions they wanted to store in
memory. By the 1950s programmers were using a symbolic notation, known as
assembly language, then hand translating the symbolic notation into machine
code. Later programs known as assemblers performed the translation task.
As primitive as they were, these first electronic machines were quite
useful in applied science and engineering. Atanasoff estimated that it would
take eight hours to solve a set of equations with eight unknowns using a
Marchant calculator, and 381 hours to solve 29 equations for 29 unknowns. The
Atanasoff-Berry computer was able to complete the task in under an hour. The
first problem run on the ENIAC, a numerical simulation used in the design of
the hydrogen bomb, required 20 seconds, as opposed to forty hours using
mechanical calculators. Eckert and Mauchly later developed what was arguably
the first commercially successful computer, the UNIVAC; in 1952, 45 minutes
after the polls closed and with 7% of the vote counted, UNIVAC predicted
Eisenhower would defeat Stevenson with 438 electoral votes (he ended up with
442).
3.2 Second Generation (1954 – 1962)
The second generation saw several important developments at all levels
of computer system design, from the technology used to build the basic circuits
to the programming languages used to write scientific applications.
Electronic switches in this era were based on discrete diode and
transistor technology with a switching time of approximately 0.3 microseconds.
The first machines to be built with this technology include TRADIC at Bell
Laboratories in 1954 and TX-0 at MIT’s Lincoln Laboratory. Memory technology
was based on magnetic cores which could be accessed in random order, as opposed
to mercury delay lines, in which data was stored as an acoustic wave that
passed sequentially through the medium and could be accessed only when the data
moved by the I/O interface.
Important innovations in computer architecture included index registers
for controlling loops and floating point units for calculations based on real
numbers. Prior to this accessing successive elements in an array was quite
tedious and often involved writing self-modifying code (programs which modified
themselves as they ran; at the time viewed as a powerful application of the
principle that programs and data were fundamentally the same, this practice is
now frowned upon as extremely hard to debug and is impossible in most high
level languages). Floating point operations were performed by libraries of software
routines in early computers, but were done in hardware in second generation
machines.
During this second generation many high level programming languages were
introduced, including FORTRAN (1956), ALGOL (1958), and COBOL (1959). Important
commercial machines of this era include the IBM 704 and 7094. The latter
introduced I/O processors for better throughput between I/O devices and main
memory.
The second generation also saw the first two supercomputers designed
specifically for numeric processing in scientific applications. The term
“supercomputer” is generally reserved for a machine that is an order of
magnitude more powerful than other machines of its era. Two machines of the
1950s deserve this title. The Livermore Atomic Research Computer (LARC) and the
IBM 7030 (aka Stretch) were early examples of machines that overlapped memory
operations with processor operations and had primitive forms of parallel
processing.
3.3 Third Generation (1963 – 1972)
The third generation brought huge gains in computational power.
Innovations in this era include the use of integrated circuits, or ICs
(semiconductor devices with several transistors built into one physical
component), semiconductor memories starting to be used instead of magnetic
cores, microprogramming as a technique for efficiently designing complex
processors, the coming of age of pipelining and other forms of parallel
processing, and the introduction of operating systems and time-sharing.
The first ICs were based on small-scale integration (SSI) circuits, which
had around 10 devices per circuit (or “chip”), and evolved to the use of
medium-scale integrated (MSI) circuits, which had up to 100 devices per chip.
Multilayered printed circuits were developed and core memory was replaced by
faster, solid state memories. Computer designers began to take advantage of
parallelism by using multiple functional units, overlapping CPU and I/O
operations, and pipelining (internal parallelism) in both the instruction
stream and the data stream. In 1964, Seymour Cray developed the CDC 6600, which
was the first architecture to use functional parallelism. By using 10 separate
functional units that could operate simultaneously and 32 independent memory
banks, the CDC 6600 was able to attain a computation rate of 1 million floating
point operations per second (1 Mflops). Five years later CDC released the 7600,
also developed by Seymour Cray. The CDC 7600, with its pipelined functional
units, is considered to be the first vector processor and was capable of
executing at 10 Mflops. The IBM 360/91, released during the same period, was
roughly twice as fast as the CDC 660. It employed instruction look ahead,
separate floating point and integer functional units and pipelined instruction
stream. The IBM 360-195 was comparable to the CDC 7600, deriving much of its
performance from a very fast cache memory. The SOLOMON computer, developed by
Westinghouse Corporation, and the ILLIAC IV, jointly developed by Burroughs,
the Department of Defense and the University of Illinois, was representative of
the first parallel computers. The Texas Instrument Advanced Scientific Computer
(T I-ASC) and the STAR- 100 of CDC were pipelined vector processors that
demonstrated the viability of that design and set the standards for subsequent
vector processors.
Early in this, third generation Cambridge and the University of London
cooperated in the development of CPL (Combined Programming Language, 1963). CPL
was, according to its authors, an attempt to capture only the important
features of the complicated and sophisticated ALGOL. However, the ALGOL, CPL
was large with many features that were hard to learn.
In an attempt at further simplification, Martin Richards of Cambridge
developed a subset of CPL called BCPL (Basic Computer Programming Language,
1967).
3.4 Fourth Generation (1972 – 1984)
The next generation of computer systems saw the use of large scale
integration (LSI – 1000 devices per chip) and very large scale integration
(VLSI – 100,000 devices per chip) in the construction of computing elements. At
this scale entire processors will fit onto a single chip, and for simple
systems the entire computer (processor, main memory, and I/O controllers) can
fit on one chip. Gate delays dropped to about Ins per gate.
Semiconductor memories replaced core memories as the main memory in most
systems; until this time the use of semiconductor memory in most systems was
limited to registers and cache.
During this period, high speed vector processors, such as the CRAY 1,
CRAY X-MP and CYBER 205 dominated the high performance computing scene.
Computers with large main memory, such as the CRAY 2, began to emerge. A
variety of parallel architectures began to appear; however, during this period
the parallel computing efforts were of a mostly experimental nature and most
computational science was carried out on vector processors. Microcomputers and
workstations were introduced and saw wide use as alternatives to time-shared
mainframe computers.
Developments in software include very high level languages such as FP
(functional programming) and Prolog (programming in logic). These languages
tend to use a declarative programming style as opposed to the imperative style
of Pascal, C. FORTRAN, et al. In a declarative style, a programmer gives a
mathematical specification of what should be computed, leaving many details of
how it should be computed to the compiler and/or runtime system. These
languages are not yet in wide use, but are very promising as notations for
programs that will run on massively parallel computers (systems with over 1,000
processors).
Compilers for established languages started to use sophisticated
optimization techniques to improve code, and compilers for vector processors
were able to vectorize simple loops (turn loops into single instructions that
would initiate an operation over an entire vector).
Two important events marked the early part of the third generation: the
development of the C programming language and the UNIX operating system, both
at Bell Labs. In 1972, Dennis Ritchie, seeking to meet the design goals of CPL
and generalize Thompson’s B, developed the C language. Thompson and Ritchie
then used C to write a version of UNIX for the DEC PDP-11. This C-based UNIX
was soon ported to many different computers, relieving users from having to
learn a new operating system each time they change computer hardware. UNIX or a
derivative of UNIX is now a de facto standard on virtually every computer
system.
An important event in the development of computational science was the
publication of the Lax report. In 1982, the US Department of Defense (DOD) and
National Science Foundation (NSF) sponsored a panel on Large Scale Computing in
Science and Engineering, chaired by Peter D. Lax. The Lax Report stated that
aggressive and focused foreign initiatives in high performance computing,
especially in Japan, were in sharp contrast to the absence of coordinated
national attention in the United States. The report noted that university
researchers had inadequate access to high performance computers. One of the
first and most visible of the responses to the Lax report was the establishment
of the NSF supercomputing centers. Phase I on this NSF program was designed to
encourage the use of high performance computing at American universities by
making cycles and training on three (and later six) existing supercomputers
immediately available. Following this Phase I stage, in 1984 – 1985 NSF
provided funding for the establishment of five Phase II supercomputing centers.
The Phase II centers, located in San Diego (San Diego supercomputing
Centre); Illinois (National Center for Supercomputing Applications); Pittsburgh
(Pittsburgh Supercomputing Center); Cornell (Cornell Theory Center); and
Princeton (John Von Neumann Center), have been extremely successful at
providing computing time on supercomputers to the academic community. In
addition they have provided many valuable training programs and have developed
several software packages that are available free of charge. These Phase II
centers continue to augment the substantial high performance computing efforts
at the National Laboratories, especially the Department of Energy (DOE) and
NASA sites.
3.5 Fifth Generation (1984 – 1990)
The development of the next generation of computer systems is
characterized mainly by the acceptance of parallel processing. Until this time,
parallelism was limited to pipelining and vector processing, or at most to a
few processors sharing jobs. The fifth generation saw the introduction of
machines with hundreds of processors that could all be working on different
parts of a single program. The scale of integration in semiconductors continued
at an incredible pace, by 1990 it was possible to build chips with a million
components – and semiconductor memories became standard on all computers.
Other new developments were the widespread use of computer networks and
the increasing use of single-user workstations. Prior to 1985, large scale
parallel processing was viewed as a research goal, but two systems introduced
around this time are typical of the first commercial products to be based on
parallel processing. The Sequent Balance 8000 connected up to 20 processors to
a single shared memory module (but each processor had its own local cache).
The machine was designed to compete with the DEC VAX-780 as a general purpose
Unix system, with each processor working on a different user’s job. However,
Sequent provided a library of subroutines that would allow programmers to write
programs that would use more than one processor, and the machine was widely
used to explore parallel algorithms and programming techniques.
The Intel iPSC -1, nicknamed “the hypercube”, took a different approach.
Instead of using one memory module, Intel connected each processor to its own
memory and used a network interface to connect processors. This distributed
memory architecture meant memory was no longer a bottleneck and large systems
(using more processors) could be built. The largest iPSC-1 had 128 processors.
Toward the end of this period, a third type of parallel processor was introduced
to the market. In this style of machine, known as a data-parallel or SIMD,
there are several thousand very simple processors. All processors work under
the direction of a single control unit; i.e. if the control unit says “add a to
b” then all processors find their local copy of a and add it to their local
copy of
b. Machines in this class include the Connection Machine from Thinking
Machines, Inc., and the MP-1 from MasPar, Inc. Scientific computing in this
period was still dominated by vector processing. Most manufacturers of vector
processors introduced parallel models, but there were very few (two to eight)
processors in these parallel machines. In the area of computer networking, both
wide area network (WAN) and local area network (LAN) technology developed at a
rapid pace, stimulating a transition from the traditional mainframe computing
environment towards a distributed computing environment in which each user has
their own workstation for relatively simple tasks (editing and compiling
programs, reading mail) but sharing large, expensive resources such as file
servers and supercomputers. RISC technology (a style of internal organization
of the CPU) and plummeting costs for RAM brought tremendous gains in
computational power of relatively low cost workstations and servers. This
period also saw a marked increase in both the quality and quantity of
scientific visualization.
3.6 Sixth Generation (1990 to date)
Transitions between generations in computer technology are hard to
define, especially as they are taking place. Some changes, such as the switch
from vacuum tubes to transistors, are immediately apparent as fundamental
changes, but others are clear only in retrospect. Many of the developments in
computer systems since 1990 reflect gradual improvements over established
systems, and thus it is hard to claim they represent a transition to a new
“generation”, but other developments will prove to be significant changes.
In this section, we offer some assessments about recent developments and
current trends that we think will have a significant impact on computational
science.
This generation is beginning with many gains in parallel computing, both
in the hardware area and in improved understanding of how to develop algorithms
to exploit diverse, massively parallel architectures. Parallel systems now
compete with vector processors in terms of total computing power and most
especially parallel systems to dominate the future.
Combinations of parallel/vector architectures are well established, and
one corporation (Fujitsu) has announced plans to build a system with over 200
of its high and vector processors.
Manufacturers have set themselves the goal of achieving teraflops (1012
arithmetic operations per second) performance by the middle of the decade, and
it is clear this will be obtained only by a system with a thousand processors
or more. Workstation technology has continued to improve, with processor
designs now using a combination of RISC, pipelining, and parallel processing.
As a result it is now possible to procure a desktop workstation that has the
same overall computing power (100 megaflops) as fourth generation
supercomputers. This development has sparked an interest in heterogeneous
computing: a program started on one workstation can find idle workstations
elsewhere in the local network to run parallel subtasks.
One of the most dramatic changes in the sixth generation is the
explosive growth of wide area networking. Network bandwidth has expanded
tremendously in the last few years and will continue to improve for the next
several years. T1 transmission rates are now standard for regional networks,
and the national “backbone” that interconnects regional networks uses T3.
Networking technology is becoming more widespread than its original
strong base in universities and government laboratories as it is rapidly
finding application in K-12 education, community networks and private industry.
A little over a decade after the warning voiced in the Lax report, the future
of a strong computational science infrastructure is bright.
The human drive to learn required innovations in equipments. Past
inventions made future innovations possible innovations, from graphics
capabilities to parallel processing, have filtered down from the supercomputers
to the mainframes. We can foresee the future of small computers by watching the
developments in the larger machines. Various renovations along with important
points (at a glance) are given in the Table, which is as follows:
Post activity:
In
this post we covered historical over view of computer in detail without any
images. If more detailed information is needed please browse or search the
internet for above terms.
Keywords:
Computer, Generations of computer.
…till next post, bye-bye and take
care.
For table of
content click
here
No comments:
Post a Comment